Access the NAS by going to a web browser and typing, where name is the specific hostname you requested. Once you have a static IP address, power on the NAS and connect it to the campus network.Remember that the address must be used every two months or IMSS can take it back. Check to see whether your name is currently in use by someone else by following the instructions at Then make your request at (request type IMSS->Network, Wireless & Remote Access->Host and Address Requests) and provide the contact information for the individual responsible for the NAS, the building and room of the NAS, and the desired hostname. If IMSS is responsible for your network, you'll want to make up a name for your device like "". If your department runs its own network, contact them and provide the MAC address for your new device. The MAC address for the device is printed on a sticker near the Ethernet port. While there are other ways of connecting, a static IP is the easiest. Get a hostname or static IP address for the NAS.Repeat for all other drives, replace cover and secure with two of the smaller screws (should be in a separate package).Gently slide hard drive into place, making sure that the data connectors are lined up.Open package and slide off cover to reveal hard drive trays Make sure you have a Philips screw driver available.Should apply to all Synology Products that use DSM 6.0. Tested on a Synology DS216j in Summer 2016.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |